Tailgate Lights display running lights, turn signals, and brake lights. Especially at night and during inclement weather, tailgate lights are appropriate for brake lights to caution other motorists, to the benefit of your safety. It has length 120cm (48inch) and 150cm (59inch) optional.
How often do you see LED tailgate lighting bars on trucks?
If you want to stand out from all the other trucks on road, then this Youstar Tri-row LED light strip is a must-have add on for anyone who likes to be a little bit different.
This 60″ 504pcs 2835SMD led chips triple LED tailgate lighting bar is universal fitted for most Pickup Trucks, Trailers, Cars, SUV, RV, VAN, etc. It allows you to mount them along the tailgate as left/right turn signal lights, brake light, reverse light, running light and emergency strobe light.
Flat 4 Pin Connector wiring diagram for reference:
Brown Wire: Ground
White Wire: Running Light
Yellow Wire: Left Turn Signal & Brake Light
Green Wire: Right Turn Signal & Brake Light
Red Wire: Reverse Light
Yellow + Green: Strobe Light
Package Included:
1 x Tri-row LED Tailgate Light
1 x 4-Way Flat Connector Wire
1 x Spare Mounting Screws Set
1 x Instruction
Note:
1, Please read the instruction paper thoroughly before any operation and installation on the light strip. Professional installation is highly recommended.
2, Please clean the area of the vehicle where you install it firstly, and then use the heater to make it more sticky. The light strip also comes with spare mounting screws set to secure it.
|
|
|
|
---|---|---|---|
Premium LED ChipsAdopted total 504pcs high-intensity leds, it output a more stylish running, brake, turn signal, reverse and strobe light to your rear friends. Let them see you! |
Strong WeatherproofWith IP67 waterproof rating and silicone tightly-sealed ends on the strip, it runs pretty well in harsh weather conditions and suits all offroad terrains. |
Plug-N-PlayCome with standard 4-pin flat connector and an extra red positive wire, easy to hoop up to the truck existing connector and reverse light, plug & play. |
4-Way Flat Connector WireCome with a 4-way flat connector wire. Easy to connect the corresponding wires in the car. |
nurpime –
Very bright, sequential signals operate at the same speed as the factory ones in the tail lights. I put some heavy boxes on top of it the night before install to flatten it out since it comes rolled up, and used a heat gun to help it stick in the cold. I used a 5 pin harness that connects to the factory 7 pin to get the reverse function to work without tapping into the tail lights.
Jack –
Works great, well worth the money.
Apolley –
The product works as described and packaged came in on time as expected. I installed these LED bar on my pickup truck,they were easy to set up and look wonderful.They are quite bright and are sure to get that distracted driver’s attention.You will have a full bar when the headlights are on, a brighter full bar when you brake, and left and right turn signals with half the bar flashing,and a full bar flashing with your hazard lights.Very nice LED Tailgate light.
Apolley –
Loved that it came quick!! Stuck good to truck (after I cleaned tailgate) & works amazing!! Def recommend
Joseph (verified owner) –
Great product!